One popular gas which is colorless and odorless is radon which can be harmful to human health, but it’s very common in many homes. See more information about this on this page here. Government bodies like the US Environmental Protection Agency require buyers to test a specific building or home for the presence of these gases and to make sure that there will be enough ventilation to redirect the gas away from the living areas.
Experts are now able to detect the activity of radon, which is a naturally-occurring matter around the soil. During a test, the pros will make sure that the presence of the gas is within acceptable limits, and they can do various services like improving your vent pipes and sealing cracks to reduce the effect of this radioactive metal.
Testing and How It’s Done
Thorium, radium, and other radioactive metals can break down in groundwater and rocks, and this action can produce radon. Some places may have less than others, but testing your home may be more than enough to make sure that you’re not getting exposed to these harmful gases. Basements and other lower areas may have a higher level of these toxins, and occupants should be careful, especially if they are frequently spending time in these enclosed spaces. The two more common ways of getting tested are the following:
Short-Term Assessments if there’s Radon
Charcoal canisters are some of the most effective ways to see if there’s radon in your home. It can last from two to seven days when the gas is absorbed by the charcoal. After you’ve completed this step by following their strict schedules and instructions, the materials are going to be sent to a nearby laboratory for analysis. Faster results can be expected but they may be less accurate because the gas levels can vary daily or from one season to another. Short-term can be considered, as 90 days, while the long-term is more than three months. The latter will of course, yield the best results and information, and with these test devices that are placed in inconspicuous areas, you may not even notice the days going by.
Kits can cost around $20 to $60, and know that some cooperatives and universities will help test the charcoal afterwards. If you want more accurate results done by professionals, you can check out kcradonpros.com for more information about the process. These are going to do most of the legwork if you’re thinking about buying a property so the entire family can be safe.
Professionals Offering Mitigation Services
After you’ve done the required tests and the results come back that you have very high levels of radon in your property, the next course of action will be to call the experts in your area for further instructions. They are going to install mitigation systems so the gases will be released out of the home, and they are going to install fans so the radon will move out of the basement. Contractors are well-equipped and knowledgeable when working with vent pipes, and any radioactive gases are going to be tracked and expelled in the soonest time possible. The goal will be to reach around 4.0 pCi/L of the gas levels. These systems can be divided into two, and they are active and passive.
New home construction may commonly use a passive system where pipes are added that are exclusive for radon vents. They will keep the gases from building up, and when it’s detected that there are extremely high levels of up to 8 pCi/L, active mitigation may be in order where the fans may be used. Teflon discs are common with Electret ion detectors that have static charges. It works by striking the ion that’s generated from the decaying gases, and the discs are struck. Laboratories are going to calculate the electrical charge reduction to know the current radon level in your home. Passive testing, except for the Electret type is available from various hardware stores, and you can also order them from online platforms. They don’t necessarily require specialized training, and you can get a charcoal liquid scintillation detector if you want to get quicker results.
Fortunately, some specialists will determine the right type that you need to install. Labor rates may vary, and they may depend on whether you’ve bought a fully-furnished home. Suction can cost only a few thousand dollars, and they can use pressurized systems to get it out of your home. Equipment pieces that will used will be determined by the season and the local weather reports since they can sometimes cause loss of heat. Pressurization processes are using a lot of electricity, and sometimes, you may need around-the-clock services to get it all out. It may seem expensive for many people, but it’s not going to be that much when you think about the expenses for LUNG CANCER that you can see more at this link: https://www.nhs.uk/conditions/lung-cancer/.
Effectiveness of the Whole Process
Reduction of at least 50% of radon is known to occur through pipes while experts can remove up to 99% concentration when they are doing everything they can to lower the gas concentrations. Adding a pressurization system in your basement or any lower-level windows may require you to close them all the time, and it might not be a good idea if you use this frequently.
Do You Need Regular Maintenance?
For the most part, many homes are fine with the occasional tests. However, if you notice that the air has become stuffy regardless of the temperature and your HVAC is not helping you breathe properly, this might be the best time to get help from the experts. Continuous monitoring may also be available and is often used in various commercial buildings. Smartphone-connected monitors may also be available, and they can start at around $200, but it will still depend. Units for the alpha spectrometry are more accurate, and they can also detect humidity levels and temperature range for you. Home remodeling projects where an entire basement will be exposed may also need radon testing for safety.