Hello spring! Spring has been with us officially for a little more than a week, but it’s felt like spring where I live for more than a month. I don’t know if that’s “lucky me” or not. I guess if you’re one of my lovely friends that is dealing with 40° then it definitely is! I’m sure that you’re more than ready for spring temps, and I’ve got a project that will get you in a warm weather mood in no time! These “hello” spring decor blocks are easy, affordable, and you can personalize them to fit with your home decor. Win, win, win!
- 4×4 canvases- I used a 9 pack from Michael’s that I bought years ago, but they still have them.
- vinyl or HTV- Regular vinyl would be easier, but I had metallic bronze HTV that was perfect for the cardstock that I used.
- scissors
- weeding tools
- chalk paint
- paint brush
- sandpaper
Guess what?! You don’t have to have a Cricut for this project! WHAT?! YES! You can make your own spring decor block set using the carbon copy method. You can find the tutorial for that in this winter porch leaner tutorial.
- paper
- pencil
- paint pen or
- paint & a small paint brush
Stretched canvases come with wood frames underneath them. You can always remove them to use the reverse canvas as a framed piece. I know! It’s wonderful!
In this case, the 4×4 blocks have more of a wood block underneath them when you remove the canvas. So, let’s do that.
Use a flathead screwdriver, or another flat object that you can wedge under staples, to pry them up. You can use pliers once you have them up high enough. I couldn’t find my needle-nose pliers, so my wire cutters had to do.
Paint the wood blocks.
My blocks have a wide frame back with a small frame inverting into a “V” on the front. You can either use the back and have a flat front or place the cardstock into the frame side on the front. I did the latter.
I painted the sides and the skinny “frame” on the front of my spring blocks. Paint was my second go ’round because I stained the wood with weathered gray stain first. It wasn’t to my liking, so I painted over it, but if you’d prefer, you can stain them.
My wood blocks are 4×4, but the space inside the frames is 3.75×3.75. I marked my ruler to the size of the frame because it was just a bit off and the squares had to be perfect to fit into these little notched “frames.”
If you’re attaching the cardstock to the back, you can just brush Mod Podge on the paper and place it on the wood. Once it dries, add a layer or two on top of the paper.
Now, there are also a couple of ways to attach your spring cardstock to the blocks if you’re using the skinny frames. One is to place the cardstock inside the frame then lift the corners and squeeze hot glue in the corners and press the cardstock down. I had to lay it down first and center it well because each frame is different and you cannot bump it at all! The edges are uneven, but you can’t tell once the paper is attached.
To seal my cardstock to the spring blocks, I decided to add a layer of Mod Podge. It also helped me use an iron on cardstock…. Don’t judge me, it had to be done! HA! I didn’t have bronze vinyl on hand, and my HTV was perfect for me second spring patterned cardstock. You can see in the photo why I went back and added Quick Grip to all of my spring blocks. The paper is lifted on the left side a bit, but I was able to fix it later.
Download my free “hello spring” PNGs or printables.
I created these “hello spring” letter designs to use on my spring blocks, and I’m sharing them for you to use for free (as always). If you made my family bunny sign, these spring decor blocks will match them.
You can download the design and upload it to Design Space if you’re using your Cricut. Since it’s on one page, you’ll have to slice it into “hello” and then single letters to resize the letters because Design Space doesn’t keep the 8.5×11 paper proportions. You can also just use my already prepared design right here. Just click and cut!
Remember, you don’t have to have a Cricut to make your own spring decor set! Just download the image, and I’ll sum up the instructions in a bit.
Finally, cut your letter using your Cricut. You can use regular vinyl or HTV. It would probably be best to use regular vinyl, but what can I say? I’m a daredevil! The bronze HTV was just too perfect and sitting right in front of me not to use!
Cut the letters apart and weed them.
Now, I promised you that you don’t need a Cricut to make your own spring decor blocks. You can see the tutorial for transferring individual letters onto a project in my winter porch leaner tutorial. Simply download and print the “hello spring” design on regular 8.5×11 paper. Scribble on the back of the paper, over the letters, with a pencil. Give it a good coat. Then cut the letters and “hello” apart and place them on the center of the blocks, taping them in place with painter’s tape. Trace the letters to transfer them to the blocks, then remove the paper. Finally, go over the design with a paint pen. Voila! Spring blocks without a cutting machine!
What do you think? Aren’t they cute? What’s great is that you can customize them to fit your home perfectly. Since it’s cardstock, you can also change them up year after year if you create a new spring decor theme like I occasionally do!
There’s plenty more to see here on the blog! If you’re looking for something specific, use the search box in the sidebar to look it up. If not, you might enjoy these ideas. Don’t have time to read them all now? That’s ok, just click over to the posts using the pictures and pin them for later. You can also add Life as a LEO Wife to your favorites and check back for new ideas and free printables and SVGs every Wednesday and Saturday, as well as link parties with tons of shared ideas on Sundays and Thursdays!